Products
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA connecting screws type TXSR with combination slot, a pressed-on plate under the head and to be used in combination with RAMPA connecting sleeves type TXVR. These are suitable, for example, for positioning adjoining cabinet walls.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA flat head screws type KFS with hex drive, guide shaft and decorative head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA hexagon keys type KR made of hardened material and with hexagon on both sides for assembling dismountable furniture. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA stud bolt type 511 for interchange. Only to be used as spare part for RAMPA driver type 515.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 507 with shank according DIN 3126-Form E 6,3. For assembling slotted RAMPA inserts (not to be used for type C and type CA). Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 512 with shank and turnable hex sleeve for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 502 with shank according DIN 3126-Form E 11,2 for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 506 with shank according DIN 3126-Form E 6,3 for assembling RAMPA inserts via hex drive. Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 504 with shank according DIN 3126-Form E 11,2 for assembling RAMPA inserts via hex drive. Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com