Product information "RAMPA DRIVER TYPE 515"
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
Details
Product attachments "RAMPA DRIVER TYPE 515"
Login
Accessories
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE ESD
RAMPA inserts type ESD with collar and cutting slot. Facilitates screwing into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE ES
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE BL
RAMPA inserts type BL without slot and with blind hole thread. With ETA approval and CE certificaion for calculable pull-out values in wood. Suitable for lifting heavy loads.
RAMPA INSERTS TYPE A
RAMPA inserts type A (similar to DIN 7965) slotted and with recess for collecting potential wood chips. Suitable for automated assembly.
RAMPA INSERTS TYPE SKL
RAMPA inserts type SKL with hex drive, threaded blind hole, an unthreaded lead and patented external thread contour. With ETA approval and CE certification for calculable pull-out values in wood. Suitable for lifting heavy loads.
RAMPA INSERTS TYPE SK330
RAMPA inserts type SK330 with hex drive, unthreaded lead and patented 3-start external thread for tilt protection and quicker assembly. Highest possible pull-out values in various woods, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE C
RAMPA inserts type C with slot have the same outer diameter as type A and B, but the inner thread is proportionally larger (thin-walled).
RAMPA INSERTS TYPE BAV
RAMPA inserts type BAV with three-hole cutting edges in the external thread. Dimensionally stable cutting into particularly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE BAN
RAMPA inserts type BAN with three-hole cutting edges in the external thread. Dimensionally stable cutting into particularly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE SKD330
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE B
RAMPA inserts type B (similar to DIN 7965) slotted and with full internal thread. Suitable for automated assembly.
RAMPA STUD BOLT TYPE 511
RAMPA stud bolt type 511 for interchange. Only to be used as spare part for RAMPA driver type 515.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.
RAMPA INSERTS TYPE SKL330
RAMPA inserts type SKL330 with hex drive, unthreaded lead and patented 3-start thread for faster assembling into wood, wood-based materials and thermoplastics. With ETA approval and CE certification for calculable pull-out values in wood. Suitable for lifting heavy loads.
Cutsomers also bought
RAMPA DRIVER TYPE 515
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
RAMPA INSERTS TYPE B
RAMPA inserts type B (similar to DIN 7965) slotted and with full internal thread. Suitable for automated assembly.
RAMPA DRIVER TYPE 501
RAMPA driver type 501 with cylindrical shank according to DIN 3126 for screwing in RAMPA sockets via the internal thread. To be used exclusively for original RAMPA inserts.
RAMPA INSERTS TYPE ES
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
Similar products
RAMPA DRIVER TYPE 515
RAMPA driver type 515 with high workload ball bearing for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
RAMPA STUD BOLT TYPE 511
RAMPA stud bolt type 511 for interchange. Only to be used as spare part for RAMPA driver type 515.
RAMPA DRIVER TYPE 512
RAMPA driver type 512 with shank and turnable hex sleeve for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
RAMPA DRIVER TYPE 502
RAMPA driver type 502 with shank according DIN 3126-Form E 11,2 for assembling RAMPA inserts via the internal thread. Only to be used with original RAMPA inserts.
RAMPA DRIVER TYPE 501
RAMPA driver type 501 with cylindrical shank according to DIN 3126 for screwing in RAMPA sockets via the internal thread. To be used exclusively for original RAMPA inserts.