Direct from the manufacturer, Made in Germany
Same-day shipping for orders placed by 12 p.m.
High stock availability
Individual consulting service
Climate neutral in own production

RAMPA KNOCK-IN INSERTS TYPE TS

Over 20 available

Drive
Diameter in mm (D)
Thread in mm (d)
Length in mm (L)
Head diameter in mm (D1)
Material + Coating
Packaging Unit
Product number: 021812001010
Product information "RAMPA KNOCK-IN INSERTS TYPE TS"
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
Product 3D model "RAMPA KNOCK-IN INSERTS TYPE TS"

By loading the 3d model, you accept CADENA's privacy policy.
Learn more

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

RAMPA COUNTERSUNK SCREWS TYPE KS
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.
RAMPA MUSHROOMHEAD SCREWS TYPE KT
RAMPA mushroom head screws type KT with hex drive and decorative head for visible joints.
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.

Cutsomers also bought

RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA KNOCK-IN INSERTS TYPE TSF
RAMPA knock-in inserts type TSF with retaining ribs under the head which prevent twisting. Due to circumferential grooves on the shaft, the knock-in insert can be additionally glued in.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.
RAMPA KNOCK-IN INSERTS TYPE TSP
RAMPA knock-in inserts type TSP with strong wings, offer torsion resistance especially in soft materials and prevent them from falling out during assembly.
RAMPA INSERTS TYPE SKD330
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.

Similar products

RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA KNOCK-IN INSERTS TYPE TSBZ
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.