RAMPA KNOCK-IN INSERTS TYPE TSLF
Product information "RAMPA KNOCK-IN INSERTS TYPE TSLF"
RAMPA knock-in inserts type TSLF with blind hole thread and knurling that prevents twisting. Allows visible assembling as the decorative flat head is without drive.
Product attachments "RAMPA KNOCK-IN INSERTS TYPE TSLF"
Login
Cutsomers also bought
RAMPA KNOCK-IN INSERTS TYPE TSP
RAMPA knock-in inserts type TSP with strong wings, offer torsion resistance especially in soft materials and prevent them from falling out during assembly.
RAMPA KNOCK-IN INSERTS TYPE TSF
RAMPA knock-in inserts type TSF with retaining ribs under the head which
prevent twisting. Due to circumferential grooves on the shaft, the knock-in insert can be additionally glued in.
RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA INSERTS TYPE SKD30
RAMPA inserts type SKD30 with sealing collar, hex drive, unthreaded lead and patented 1-start external thread contour for simplified assembling in wood, wood-based materials and thermoplastics.
Similar products
RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA KNOCK-IN INSERTS TYPE TSBZ
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.