Treaded wood inserts
RAMPA INSERTS TYPE SK330
RAMPA inserts type SK330 with hex drive, unthreaded lead and patented 3-start external thread for tilt protection and quicker assembly. Highest possible pull-out values in various woods, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE SKD330
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE SKD30
RAMPA inserts type SKD30 with sealing collar, hex drive, unthreaded lead and patented 1-start external thread contour for simplified assembling in wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE ES
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE BAV
RAMPA inserts type BAV with three-hole cutting edges in the external thread. Dimensionally stable cutting into particularly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE E
RAMPA inserts type E with slot for wood (from 750 kg / m³ raw density) and plastic applications.
RAMPA INSERTS TYPE E SHORT
RAMPA insert type E without slot and with a length of only 4.8 mm for HPL / compact boards from 6 mm board thickness.
RAMPA INSERTS TYPE SKL330
RAMPA inserts type SKL330 with hex drive, unthreaded lead and patented 3-start thread for faster assembling into wood, wood-based materials and thermoplastics. With ETA approval and CE certification for calculable pull-out values in wood. Suitable for lifting heavy loads.
RAMPA INSERTS TYPE SKL
RAMPA inserts type SKL with hex drive, threaded blind hole, an unthreaded lead and patented external thread contour. With ETA approval and CE certification for calculable pull-out values in wood. Suitable for lifting heavy loads.
RAMPA INSERTS TYPE BL
RAMPA inserts type BL without slot and with blind hole thread. With ETA approval and CE certificaion for calculable pull-out values in wood. Suitable for lifting heavy loads.
RAMPA INSERTS TYPE BAN
RAMPA inserts type BAN with three-hole cutting edges in the external thread. Dimensionally stable cutting into particularly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE ESD
RAMPA inserts type ESD with collar and cutting slot. Facilitates screwing into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE BAS
RAMPA inserts type BAS with three cutting blind holes (space for wood chips) in external thread. Dimensionally stable cutting into extremly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE D
RAMPA inserts type D with slot and with sealing collar on the slotted end. Suitable for e.g. seat shells made of multiplex materials.
RAMPA INSERTS TYPE SK
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.
RAMPA INSERTS TYPE SKD
RAMPA inserts type SKD with sealing collar, hex drive and unthreaded lead for assembling in wood, wood-based materials and thermoplastics.
RAMPA INSERTS TYPE B
RAMPA inserts type B (similar to DIN 7965) slotted and with full internal thread. Suitable for automated assembly.
RAMPA INSERTS TYPE A
RAMPA inserts type A (similar to DIN 7965) slotted and with recess for collecting potential wood chips. Suitable for automated assembly.
RAMPA INSERTS TYPE C
RAMPA inserts type C with slot have the same outer diameter as type A and B, but the inner thread is proportionally larger (thin-walled).
RAMPA INSERTS TYPE ESK
RAMPA inserts type ESK with cutting slot and hex drive. Facilitates scewing into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.
RAMPA INSERTS TYPE SKD30L
RAMPA inserts type SKD30L with sealing collar, hex drive, unthreaded lead and patented 1-start external thread contour turned to left for simplified assembling with special requirements in wood, wood-based materials and thermoplastics. Prevents loosening in frequent assembling applications and high friction values.
RAMPA INSERTS TYPE SRD
RAMPA inserts type SRD with sealing collar and hexalobular drive
(DIN EN ISO 10664). Correspond dimensionally to RAMPA inserts type SKD.
RAMPA INSERTS TYPE SKD30K
RAMPA® inserts type SKD30K with sealing collar, hex drive and patented 1-start external thread contour for simplified assembling in wood and wood-based materials. The insertion aid type 50641001 is recommended for better processing.