RAMPA FLAT HEAD SCREWS TYPE KF
€55.07
Only 5 available
Product information "RAMPA FLAT HEAD SCREWS TYPE KF"
Manufacturer Information:
RAMPA GmbH & Co. KG
Auf der Heide 8
21514 Büchen
Germany
E-Mail: mail@rampa.com
Login
Accessories
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type ES with wide cutting slot. Facilitates assembly into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type BAV with three-hole cutting edges in the external thread. Dimensionally stable cutting into particularly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA cross dowels type Q with slot for high load capacities e.g. for frames and corner connections. Allows the transmission of large forces over a large surface area in the material.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type SK330 with hex drive, unthreaded lead and patented 3-start external thread for tilt protection and quicker assembly. Highest possible pull-out values in various woods, wood-based materials and thermoplastics.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type BAN with three-hole cutting edges in the external thread. Dimensionally stable cutting into particularly hard materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
Customers also bought
RAMPA inserts type A (similar to DIN 7965) slotted and with recess for collecting potential wood chips. Suitable for automated assembly.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type SKD330 with sealing collar, hex drive, unthreaded lead and patented 3-start thread contour for tilt protection and quicker assembly. Highest possible pull-out values in various wood, wood-based materials and thermoplastics.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA driver type 507 with shank according DIN 3126-Form E 6,3. For assembling slotted RAMPA inserts (not to be used for type C and type CA). Only to be used with original RAMPA inserts.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type SK with hex drive and an unthreaded lead for simplified screwing into wood and plastic applications.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com