Online-Shop
RAMPA inserts type A (similar to DIN 7965) slotted and with recess for collecting potential wood chips. Suitable for automated assembly.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA cap nuts type RF with hex drive, through hole to internal thread and decorative flat head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type C with slot have the same outer diameter as type A and B, but the inner thread is proportionally larger (thin-walled).Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA cap nuts type RT with hex drive, through hole to internal thread and decorative round head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type DVZ produced by zinc die casting process in extra short version and with internal thread stop for thin walled shaped wood. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type SKDL with large collar and hex drive. The external thread is a left-hand thread and prevents loosening in frequent screwing applications. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type CV without slot. Correspond dimensionally to RAMPA inserts type C.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type BV without slot (similar to DIN 7965), well suited for automatic feeding.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA rosettes type US according to DIN 7991 to accommodate countersunk screws (e.g. RAMPA screws type KS).Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA set screws type G (comply with DIN 976a) without bevel.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type ESK with cutting slot and hex drive. Facilitates scewing into harder materials such as thermosetting plastics and thermoplastics, light metal alloys and cast steel applications.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA connecting sleeves type TXVR with combination slot, a pressed-on plate under the head and to be used in combination with RAMPA connecting screws type TXSR. These are suitable, for example, for positioning adjoining cabinet walls.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA corner connectors type KOKF with hex drive and decorative flat head for visible connections. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA grooved dowels type BZ to be used in combination with RAMPA grooved bushes. To be used for exact positioning of two opposite elements (e.g. additional boards for tables).
RAMPA knurled nuts type RM, which are knocked into pilot holes and glued in as dowels. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA corner connectors type KOK with hex drive and head hole (Ø 3 mm). Suitable for screwing chipboard. Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA woodscrews type HFK with hex drive and decorative flat head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA inserts type SKZ produced by zinc die casting process, hex drive and conical external thread. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA countersunk screws type KS (comply tiwh DIN 7991) with hex drive and decorative countersunk head for visible joints.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com
RAMPA cap nuts type RS with hex drive and countersunk head for a flush surface.Manufacturer Information: RAMPA GmbH & Co. KG Auf der Heide 8 21514 Büchen Germany E-Mail: mail@rampa.com