Direct from the manufacturer, Made in Germany
Same-day shipping for orders placed by 12 p.m.
High stock availability
Individual consulting service +49 (0) 4155 8141 - 601
Climate neutral in own production

RAMPA KNOCK-IN INSERTS TYPE TSP

Only 2 available

Drive
Diameter in mm (D)
Thread in mm (d)
Length in mm (L)
Head diameter in mm (D1)
Material + Coating
Packaging Unit
Product number: 4596090010100
Product information "RAMPA KNOCK-IN INSERTS TYPE TSP"
RAMPA knock-in inserts type TSP with strong wings, offer torsion resistance especially in soft materials and prevent them from falling out during assembly.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

RAMPA CROSS DOWELS TYPE Q
RAMPA cross dowels type Q with slot for high load capacities e.g. for frames and corner connections. Allows the transmission of large forces over a large surface area in the material.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
RAMPA FLAT HEAD SCREWS TYPE KF
RAMPA flat head screws type KF with hex drive and decorative head for visible joints.
RAMPA INSERTS TYPE SKD30
RAMPA inserts type SKD30 with sealing collar, hex drive, unthreaded lead and patented 1-start external thread contour for simplified assembling in wood, wood-based materials and thermoplastics.
RAMPA ROSETTES TYPE US
RAMPA rosettes type US according to DIN 7991 to accommodate countersunk screws (e.g. RAMPA screws type KS).

Similar products

RAMPA KNOCK-IN INSERTS TYPE TS
RAMPA knock-in inserts type TS with collar, continuous internal thread and knurled shank. Enables reliable positioning in the assembly process.
RAMPA KNOCK-IN INSERTS TYPE TSZ
RAMPA knock-in inserts type TSZ with continous internal thread and four strong pikes on the shank for strong hold without torsion.
RAMPA KNOCK-IN INSERTS TYPE TSBZ
RAMPA knock-in inserts type TSBZ produced by zinc die casting process with collar and strong spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing retention forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TSLZ
RAMPA knock-in inserts type TSLZ produced by zinc die casting process with collar and spikes on the shank for strong hold without torsion. Note: Zinc die-cast parts have decreasing holding forces and a shortened product life cycle.
RAMPA KNOCK-IN INSERTS TYPE TS3L
RAMPA knock-in inserts type TS3L with three fixing holes (Ø 3 mm) for additional securing with e.g. screws or nails.